VXC2P Dante/PoE Powered Ceiling Speaker Nowość

VXC2P
Speaker type Full-range bass-reflex powered speaker
Frequency range (-10dB) 80Hz-20kHz
Nominal coverage 160°conical
Component configuration 6.4 cm (2.5-inch) full-range driver
Maximum output level 97 dB SPL
Power rating Dynamic 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
Continuous 15W (PoE+(IEEE802.3at)), 6W (PoE(IEEE802.3af))
Dimensions (Φ x D) ∅225 × D133 mm (including grille)
Weight 1.8 kg (including grille)
In Operation Temperature 0 °C - 40 °C
Humidity 30% - 90% (non-condensing)
Storage Temperature −20 °C - 60 °C
Humidity 20% - 90% (non-condensing)
Finish White
I/O connectors RJ-45 (PoE/Dante) x1
Controls 8-switch DIP switch × 1
Indicators Power (front), SYNC (RJ-45), LINK/ACT (RJ-45)
Protection circuit Speaker processing Overheating protection, overpower output protection, overvoltage input protection
Amplifier protection Overheating protection, short circuit protection, DC detection protection, overvoltage protection, undervoltage protection
Power supply protection Overcurrent protection, overheating protection
Cooling Natural air cooling
Power requirements PoE+ (IEEE 802.3at), PoE (IEEE 802.3af)
Power consumption Idle : 4.0W, 1/8 : 6.2 W (PoE+ (IEEE 802.3at)), 4.9 W (PoE (IEEE 802.3af))
Maximum power consumption 25.5 W (PoE+ (IEEE 802.3 at)), 12.95 W (PoE (IEEE 802.3 af))
Magnetic shielding Non-magnetic shielding type
Dust and water resistant Non-compliant
Certificate VCCI
Signal Processing EQ/Enhancer, Volume, PEQ, Ducker (noise gate), Mixer, Delay, Speaker EQ (6 band)
Options Reinforcing bracket kit AB-C2
Accessories Grille, cutout template, safety wire, Owner’s Manual, Safety Guide, Installation/Dimensional diagrams