RM-TT Tabletop Array Microphone

RM-TT
Dimensions W140 mm × D140 mm × H41.5 mm
Weight 310 g
Power Requirements PoE (IEEE 802.3af), DC 48 V
Maximum Power Consumption 4.5 W
In Operation Temperature 0 - 40 ℃
Humidity 30 % - 90 % (No condensation)
Storage Temperature -20 - 60 ℃
Humidity 20 % - 90 % (No condensation)
Indicator Mute Indicator (Mute/Unmute), Status Indicator (Ring), Network Port Indicator
Maximum Device Number with RM-CR 14 (without VXL1-16P, up to 16)
Accessories Installation Manual, Table-top mounting adapter, 3 x Screw for mounting, 3 x spacer
Ether1 Dante Audio/Dante Control, Remote Control, Web UI, PoE
Cable Requirements Cat 5e or higher (STP)
Audio I/O Dante 1in x 2out, In1=AEC reference signal/Out1=output of beam mix, Out2= output of beam mix (simple processed)
Sampling Rate 48 kHz
Bit Depth 24 bit
Latency including signal processing, 46 ms (except for toroidal directivity), 50 ms (for toroidal directivity)
Frequency Response 160 Hz – 16 kHz (-10 dB)
Maximum Input Level of SPL (0dBFS) 106.8 dB SPL
Self Noise 6.3 dBA SPL
SN Ratio (Ref. 94 dB SPL at 1 kHz) 87.7 dBA
Sensitivity -12.8 dBFS/Pa
Dynamic Range 100.5 dBA
Signal Processing Auto Voice Tracking, AEC, NR, Dereverberation, Auto Mixer, AGC, User PEQ, Output Gain, Selectable Polar Pattern: Cardioid, Hyper Cardioid, Super Cardioid, Omni, Bi-Directional, Toroid

Frequency Response/Polar Pattern